home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr30
/
wd_accel.zip
/
INSTALL.DAT
< prev
next >
Wrap
Text File
|
1993-05-14
|
46KB
|
1,071 lines
/* |---------------------------------------------------------------------|
| Copyright (c) Western Digital Corporation 1990, All Rights Reserved |
| |
| 1C Install Program |
| Version 1.0 |
| Date 10/04/90 |
| Author Lenny Law |
| |
| This file must be named 'Install.Dat' and reside on the |
| main distribution diskette. Another file which must be on |
| every distribution diskette is 'DISK.ID'. |
| |
| Revision History |
| 07/13/90 rev 1.0 LL first rel |
|---------------------------------------------------------------------|
*/
@DefineProject
@Name = "VGA 1024C Accelerator Card"
@Version = "8.1B"
@SubDir = "\\"
@OutDrive = Z
@EndProject
@DefineVars
@QString @Company = ""
@QString @NewStar = "ws132.com"
@Qstring @Program = "VGA1024C.EXE"
@Qstring @Copyright ="Copyright(c) WDI 1993, All Rights Reserved"
@Qstring @License = "Licensed by Western Digital for use by its customers only"
@Dir @Win3Dir = "\\SetUp\\"
@Drive @Win3Drive = C
@EndVars
@Welcome
@CLS
@Company @Name Installation Program @Version
@Copyright
-----------------------------------------------------------------
Please verify the switches are set correctly on the @Company
@Name before starting the installation. The @Company
@Name Utilities are distributed on two 5-1/4" disks.
The installation program used to install VGA 1024C, INSTALL,
is licensed software provided by Knowledge Dynamics Corporation,
Highway Contract 4 Box 185-H, Canyon Lake, Texas 78133-3508 (USA),
1-512-964-3994. INSTALL is Copyright(c) 1987-1989 by Knowledge
Dynamics Corporation which reserves all copyright protection
worldwide. INSTALL is provided to you for the exclusive purpose
of installing VGA 1024C.
-----------------------------------------------------------------
@Pause
@EndWelcome
@Welcome
@CLS
!!!! W A R N I N G !!!!
-----------------------------------------------------------------
If you are installing a MicroSoft mouse , IBM PS/2 mouse or 100%
compatible mouse, please refer to the software manual for detail
information on how to use the @Program utility to switch from
VGA to non VGA (Hercules, CGA or MDA) modes.
-----------------------------------------------------------------
@Pause
@EndWelcome
@Welcome
@CLS
@Company @Name User Notes - @Version
****************************************
The following information is not contained in the software manual.
1) All 1024x768 16 color and 640x480 256 color drivers require 512k of
memory on the @Company @Name.
2) AutoCAD 1024x768 driver supports AutoSketch, but does not support
AutoShade in this release.
3) To install WordStar Professional Release 5 for use in the 132 column
text modes, use the same procedures as described in the software manual
for WordStar Professional Release 4.
Note: you must start WordStar by typing RWS WSxxxxxx <filename> [Enter]
to use the page preview mode in the 132 column text modes. Where
WSxxxxxx is the name of your modified WordStar program for use in
132 column text modes.
@Pause
@EndWelcome
@GetGroups
@Company @Name DRIVER INSTALLATION
Use the ARROW, PG-UP and PG-DOWN keys
To select your choice press <Enter>
@Set A = " AutoCAD"
@Set K = " AutoShade"
@Set C = " Cadvance 1.2"
@Set T = " Framework II"
@Set D = " GEM 3.x"
@Set G = " Generic CADD Level 3"
@Set O = " Lotus - 1-2-3"
@Set L = " PCad Level 2"
@Set S = " Lotus - Symphony"
@Set U = " VGA 1024C Utilities"
@Set X = " Ventura Publisher V1.1/2.0"
@Set V = " VersaCAD"
@Set N = " MicroSoft Windows 3.0"
@Set P = " WordPerfect 5.0"
@Set W = " WordStar 3.3"
@EndGroups
@If ('A' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 18 = " v2.18 thru v2.62 - 640 by 480 16 color"
@Option 19 = " v2.18 thru v2.62 - 800 by 600 16 color"
@Option 62 = " v2.18 thru v2.62 - 1024 by 768 16 color"
@Option 20 = " Release 9 / 10 - 800 by 600 16 color"
@Option 63 = " Release 9 / 10 - 800 by 600 256 color"
@Option 21 = " Release 9 / 10 - 1024 by 768 4 color"
@Option 22 = " Release 9 / 10 - 1024 by 768 16 color"
@EndOption
@If (@EMMTotal != 0)
@If (20 [= @Option || 21 [= @Option || 22 [= @Option || 63 [= @Option)
@GetOption
Include the DisplayList ADI driver also ?
The DisplayList ADI driver ONLY works with
AutoCAD Release 10.
@Option 99 = " Yes"
@Option 100 = " No"
@EndOption
@EndIf
@Else
@Display
NOTE: The VGA DisplayList AutoCAD ADI driver
requires expanded memory to run. Since the
expanded memory manager is not loaded, only
the non-DisplayList ADI drivers will be
installed. The DisplayList ADI driver will
not be included.
@Pause
@EndDisplay
@EndIf
@If (18 [! @Option)
@GetOption
Copy the SETCOLR.EXE utility also ?
This utility permits you to configure the colors
used by AutoCAD.
@Option 101 = " Yes"
@Option 102 = " No"
@EndOption
@EndIf
@GetOutDrive
@Cls
Select the Drive on which to install AutoCad driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is AutoCad installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 2 of 2"
@BeginLib acad.lif
@If (18 [= @Option)
@File ds640.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (19 [= @Option)
@File ds800.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (20 [= @Option)
@File ds800x16.exe @Out "@OutDrive:\\@SubDir\\":*.*
@If (99 [= @Option)
@File wdvgadl8.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File wdvgadl.doc @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.doc @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@ElseIf (21 [= @Option)
@File ds1024x4.exe @Out "@OutDrive:\\@SubDir\\":*.*
@If (99 [= @Option)
@File wdvgadl1.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File wdvgadl.doc @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.doc @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@ElseIf (22 [= @Option)
@File ds102416.exe @Out "@OutDrive:\\@SubDir\\":*.*
@If (99 [= @Option)
@File wdvgadl1.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File wdvgadl.doc @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.doc @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@ElseIf (62 [= @option)
@File ds1024.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (63 [= @option)
@File ds800ff.exe @Out "@OutDrive:\\@SubDir\\":*.*
@If (99 [= @Option)
@File wdvgadl8.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File wdvgadl.doc @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.doc @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndIf
@File acad.txt @Out "@OutDrive:\\@SubDir\\":*.*
@If (101 [= @Option)
@File setcolr.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File setcolr.doc @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@Cls
The ADI driver(s) have been extracted.
Please see the utilities software manual
for complete details on running AutoCad.
@Pause
@EndFinish
@ElseIf ('C' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 35 = " 640 by 480 16 color"
@Option 36 = " 800 by 600 16 color"
@Option 64 = " 800 by 600 256 color"
@Option 48 = "1024 by 768 4 color"
@Option 37 = "1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install Cadvance driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is Cadvance v1.2 installed ? "
@EndSubDir
@If (@Exists "@OutDrive:\\@SubDir\\gs.drv")
@Display
If you would like to save GS.DRV
press <Esc> to exit the program.
Copy the drivers to a safe place
and start again.
@Pause
@EndDisplay
@EndIf
@DefineDisk
@Label = "Disk 2 of 2"
@BeginLib cadvance.lif
@If (35 [= @Option)
@File gsvga.drv @Out "@OutDrive:\\@SubDir\\":gs.drv
@ElseIf (36 [= @Option)
@File gs800.drv @Out "@OutDrive:\\@SubDir\\":gs.drv
@ElseIf (48 [= @Option)
@File gs1024x4.drv @Out "@OutDrive:\\@SubDir\\":gs.drv
@ElseIf (37 [= @option)
@File gs102416.drv @Out "@OutDrive:\\@SubDir\\":gs.drv
@ElseIf (64 [= @option)
@File gs800ff.drv @Out "@OutDrive:\\@SubDir\\":gs.drv
@EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@Cls
The Cadvance driver has been installed.
@If (@Exists "gs.drv")
You may start Cadvance in the new resolution.
@EndIf
@Pause
@EndFinish
@ElseIf ('D' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 1 = " 800 by 600 2 color"
@Option 3 = " 800 by 600 16 color"
@Option 2 = "1024 by 768 2 color"
@Option 4 = "1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install GEM driver
@Suppress A
@Suppress B
@EndOutDrive
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib gem3.lif
@If (1 [= @Option)
@File 800m.dat @Out "@OutDrive":\GEMAPPS\config.dat
@File sd_800_m.vga @Out "@OutDrive":\GEMAPPS\*.*
@ElseIf (2 [= @Option)
@File 1km.dat @Out "@OutDrive":\GEMAPPS\config.dat
@File sd_1k_m.vga @Out "@OutDrive":\GEMAPPS\*.*
@ElseIf (3 [= @Option)
@File 800c.dat @Out "@OutDrive":\GEMAPPS\config.dat
@File sd_800_c.vga @Out "@OutDrive":\GEMAPPS\*.*
@ElseIf (4 [= @Option)
@File 1kc.dat @Out "@OutDrive":\GEMAPPS\config.dat
@File sd_1k_c.vga @Out "@OutDrive":\GEMAPPS\*.*
@EndIf
@File install.exe @Out "@OutDrive":\GEMAPPS\*.*
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "\\GEMAPPS\\"
@Cls
┌───────────────┐
│ W A R N I N G │
└───────────────┘
If 'COMMAND.COM' is not accessible from the PATH
or current directory, then you must change
to the GEMAPPS directory and run INSTALL.
Otherwise GEM installation will start now.
Please follow instructions in the software manual.
@Pause
@System "Install"
@EndFinish
@ElseIf ('G' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 51 = " 640 by 400 256 color"
@Option 52 = " 640 by 480 256 color"
@Option 43 = " 800 by 600 16 color"
@Option 65 = " 800 by 600 256 color"
@Option 44 = "1024 by 768 2 color"
@Option 45 = "1024 by 768 4 color"
@option 46 = "1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install Generic Cadd driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is Generic Cadd Level 3 installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 2 of 2"
@BeginLib generic.lif
@If (43 [= @Option)
@File para800.vgd @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (44 [= @Option)
@File p1024x2.vgd @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (45 [= @Option)
@File p1024x4.vgd @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (46 [= @Option)
@File p1024x16.vgd @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (51 [= @Option)
@File p640x400.vgd @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (52 [= @Option)
@File p640x480.vgd @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (65 [= @Option)
@File p800x600.vgd @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@If (@Exists "config.exe")
@Execute "config.exe",""
@Abort
@Else
Unable to locate CONFIG.EXE from Generic CADD.
You must run CONFIG to complete installation !
@Pause
@Abort
@EndIf
@EndFinsh
@ElseIf ('I' [= @Group)
@Display
@Cls
Please make sure you are in DOS environment
before installing the OS/2 driver. If you
have NOT done so, exit the program now !
You must also have a multi-frequency monitor
to run the OS/2 driver.
@Pause
@EndDisplay
@GetOption
@Cls
Select the resolution you would like to use
@Option 80 = " 640 by 480 256 color"
@Option 53 = " 800 by 600 16 color"
@Option 54 = " 1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install OS/2 driver
@EndOutDrive
@If (@Removable == 0)
@GetSubDir
@Cls
@Prompt = " Select the directory in which to install OS/2 driver"
@EndSubDir
@EndIf
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib os2.lif
@If (53 [= @Option)
@File os2800.dll @Out "@OutDrive:\\SubDir\\":*.*
@File pvga800.ddp @Out "@OutDrive:\\SubDir\\":*.*
@ElseIf (54 [= @Option)
@File os21024.dll @Out "@OutDrive:\\SubDir\\":*.*
@File pvga1024.ddp @Out "@OutDrive:\\SubDir\\":*.*
@ElseIf (80 [= @Option)
@File os2640.dll @Out "@OutDrive:\\SubDir\\":*.*
@File pvga640.ddp @Out "@OutDrive:\\SubDir\\":*.*
@EndIf
@File BVHWNDW.DLL @Out "@OutDrive:\\SubDir\\":*.*
@File BVHINIT.DLL @Out "@OutDrive:\\SubDir\\":*.*
@File BVHVGA.DLL @Out "@OutDrive:\\SubDir\\":*.*
@File WDINIT.DLL @Out "@OutDrive:\\SubDir\\":*.*
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@Cls
@If (@Removable == 0)
You must create a device support disk, in order to
install the display driver. Copy the device driver
profile file (*.ddp) to a floppy disk, along with the
corresponding display driver (*.dll).
@EndIf
While in OS/2, run the utility DDINSTAL in the \OS2\
INSTALL directory to change to the new driver. When
you are prompted for the device support disk, insert
the floppy disk created in the above step.
Follow the on screen instruction to complete the
installation. You will also need the OS/2 Install
disk 1 to complete the process. Reboot OS2 to start
with the new resolution.
@Pause
@EndFinish
@ElseIf ('K' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 55 = " 640 by 400 256 color"
@Option 56 = " 640 by 480 256 color"
@Option 66 = " 800 by 600 256 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install AutoShade driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is AutoShade installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 2 of 2"
@BeginLib acad.lif
@If (55 [= @Option)
@File rd400.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (56 [= @Option)
@File rd480.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (66 [= @Option)
@File rd800.exe @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@File shade.doc @Out "@OutDrive:\\@SubDir\\":*.*
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@Cls
The ADI driver(s) has been extracted.
Please see the utilities software manual
for complete details on running AutoShade.
@Pause
@If (@Exists "shade.cfg")
@System "del shade.cfg"
@Else
@Cls
┌───────────────────────────────────────┐
│ PLEASE ANSWER THE FOLLOWING QUESTIONS │
│ FROM AUTOSHADE AS INSTRUCTED BELOW │
└───────────────────────────────────────┘
When asked "Select display device"
choose: IBM Video Graphics Array
When asked "Select rendering display device"
choose: Autodesk Device Interface rendering driver
When asked "Share a single screen (DEFAULT No)"
choose: Yes
When asked "Does FLIPSCREEN require a redraw (DEFAULT No)"
choose: Yes
You MUST enter 'SHADE' at the DOS prompt to start
reconfiguration in order for AutoShade to make use
of the newly installed driver.
@Pause
@EndIf
@EndFinish
@ElseIf ('L' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 5 = " 800 by 600 16 color"
@Option 6 = " 1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install PCad driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is PCad Level 2 installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 2 of 2"
@BeginLib pcad.lif
@If (5 [= @Option)
@File dwdpvga.drv @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (6 [= @Option)
@File dpvga1k.drv @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "\\"
@Cls
Please edit the DISPLAY line in 'PCADDRV.SYS' (in
root dir) to reflect the change in the driver.
┌────────────────────────────────────────────┐
│ EX: system \pcad\tkcards\sibmpc.drv │
│ input \pcad\tkcards\imsser.drv │
│ display \pcad\tkcards\dwdpvga.sys │
└────────────────────────────────────────────┘
@Pause
@EndFinish
@ElseIf ('N' [= @Group)
@GetOutDrive @Win3Drive
@Cls
Select the Drive on which to make the OEM SETUP DISK directory
@EndOutDrive
@If (@Removable == 0)
@GetSubDir @Win3Dir
@Prompt = " Which subdirectory to place the OEM SETUP ? "
@EndSubDir
@EndIf
@GetOutDrive
@Cls
Which is the Drive that have Windows 3.0 installed ?
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Prompt = " Which subdirectory is Windows 3.0 installed ?"
@EndSubDir
@GetOption
@Cls
Do you have a printer available and ready for use ?
@Option 78 = " No"
@Option 79 = " Yes"
@EndOption
@DefineDisk
@Label = "Disk 2 of 2"
@BeginLib win3.lif
@File cga40850.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File cga40woa.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File cga80850.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File cga80woa.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File ega40850.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File ega40woa.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File ega80850.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File ega80woa.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File vgafix.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File vgaoem.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File vgasys.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File 8514fix.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File 8514oem.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File 8514sys.fon @Out720k @Win3Drive:\@Win3Dir\*.*
@File pvga480.drv @Out720k @Win3Drive:\@Win3Dir\*.*
@File pvga600.drv @Out720k @Win3Drive:\@Win3Dir\*.*
@File vga800.drv @Out720k @Win3Drive:\@Win3Dir\*.*
@File bw1024.drv @Out720k @Win3Drive:\@Win3Dir\*.*
@File vga1024.drv @Out720k @Win3Drive:\@Win3Dir\*.*
@File oemdisk1 @Out720k @Win3Drive:\@Win3Dir\*.*
@File oemsetup.inf @Out720k @Win3Drive:\@Win3Dir\*.*
@File colors.exe @Out720k @Win3Drive:\@Win3Dir\*.*
@File vddpvga.386 @Out720k @Win3Drive:\@Win3Dir\*.*
@File vgalogo.rle @Out720k @Win3Drive:\@Win3Dir\*.*
@File vgalogo.lgo @Out720k @Win3Drive:\@Win3Dir\*.*
@File vgacolor.gr2 @Out720k @Win3Drive:\@Win3Dir\*.*
@File pvga.gr3 @Out720k @Win3Drive:\@Win3Dir\*.*
@File win3_drv.txt @Out "@OutDrive:\\@SubDir\\":system\*.*
@File vddpvga.386 @Out "@OutDrive:\\@SubDir\\":system\*.*
@EndLib
@EndDisk
@Finish
@Cls
To install new drivers for Windows 3.0
Please read the instruction in 'WIN3_DRV.TXT'
on the Windows 3.0 'System' directory
Be sure to enter the path (DRIVE and DIRECTORY)
where you placed the OEM SETUP DISK directory when
prompted for this in Setup
@Pause
@Cls
@ChDrive @OutDrive
@If (78 [= @Option)
@ChDir "@SubDir"
Please print a hard copy of "WIN3_DRV.TXT" and read
it carefully, before you start the Setup process.
@ElseIf (79 [= @Option)
@ChDir "@SubDir\\system"
Printing WIN3_DRV.TXT .....
@System "type win3_drv.txt >prn"
@EndIf
@Pause
@EndFinish
@ElseIf ('O' [= @Group || 'S' [= @Group)
@GetOutDrive
@Cls
Select the Drive on which to install Lotus driver
@EndOutDrive
@If (@Removable == 0)
@GetSubDir
@Cls
@Prompt = "Which subdirectory is Lotus installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib lotus.lif
@File sp0_25s.drv @Out "@OutDrive:\\@SubDir\\":*.*
@File sp0_43s.drv @Out "@OutDrive:\\@SubDir\\":*.*
@File sp1_480s.drv @Out "@OutDrive:\\@SubDir\\":*.*
@File sp1_600s.drv @Out "@OutDrive:\\@SubDir\\":*.*
@EndLib
@EndDisk
@Else
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib lotus.lif
@File sp0_25s.drv @Out "@OutDrive":\*.*
@File sp0_43s.drv @Out "@OutDrive":\*.*
@File sp1_480s.drv @Out "@OutDrive":\*.*
@File sp1_600s.drv @Out "@OutDrive":\*.*
@EndLib
@EndDisk
@EndIf
@Display
NOTE:
If you are installing Lotus for the first time, the Lotus
INSTALL program must be in Drive A. Also, the new drivers
must be copied to a floppy disk so that they may be modified
after decompression.
@Pause
@EndDisplay
@Finish
@If (@Removable == 0)
@ChDrive @OutDrive
@ChDir "@SubDir"
@If (@Exists "@OutDrive:\\@SubDir\\install.exe")
@If (@Exists "single.lbr")
@System "del single.lbr"
@EndIf
@System "Install"
@Else
Unable to find Lotus INSTALL.
Installation failed. You must run INSTALL from Lotus
to use the new driver.
@EndIf
@Else
You must now run the Lotus INSTALL program
to modify your driver to support the VGA 1024C
extended capabilities.
@EndIf
Please see the utilities software manual for complete
details for installing and running Lotus.
@Pause
@EndFinish
@ElseIf ('P' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 47 = " 800 by 600 Graphics mode"
@Option 11 = "1024 by 768 Graphics mode"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install WordPerfect driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is WordPerfect 5.0 installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib wp.lif
@If (47 [= @Option)
@File wdpvga1.wpd @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (11 [= @Option)
@File wdpvga2.wpd @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndLib
@EndDisk
@Display
NOTE:
In order to use the new driver, you need to start WordPerfect
and enter 'Shift + F1' to choose the display driver.
@Pause
@EndDisplay
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@If (@Exists "wp.exe")
@Execute "wp.exe",""
@Else
Unable to locate WP.EXE program.
You must run WP and enter 'Shift + F1'
to choose the display driver
@Pause
@Abort
@EndIf
@EndFinish
@ElseIf ('T' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 38 = "Text 132 x 25 - Graphics 640 by 480"
@Option 39 = "Text 132 x 43 - Graphics 640 by 480"
@Option 40 = "Text 132 x 25 - Graphics 800 by 600"
@Option 41 = "Text 132 x 43 - Graphics 800 by 600"
@Option 42 = "Graphics 800 by 600 - Graphics 800 by 600"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install FrameworkII driver
@EndOutDrive
@If (@Removable == 0)
@GetSubDir
@Cls
@Prompt = " Which directory to put the files ? "
Note: You will have to prepare a floppy disk
for transferring the driver(s) later.
@EndSubDir
@EndIf
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib framewrk.lif
@If (38 [= @Option)
@File pvga1.sc @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (39 [= @Option)
@File pvga2.sc @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (40 [= @Option)
@File pvga3.sc @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (41 [= @Option)
@File pvga4.sc @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (42 [= @Option)
@File pvga5.sc @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@Cls
@If (@Removable == 0)
You MUST copy the driver (*.sc) to a floppy first
before starting installation from Setup.
@EndIf
Please follow the instruction in the VGA 1024C
Software manual and run SETUP program from the
FrameworkII's Setup disk to configure the VGA
1024C driver.
@Pause
@EndFinish
@ElseIf ('U' [= @Group)
@GetOption
@Cls
Select the utility you would like to install
@Option 26 = "BRIDGE.COM"
@Option 67 = "PROGRAM.TXT"
@Option 27 = "RAMBIOS.EXE"
@Option 28 = "RAMBIOS.SYS"
@Option 30 = "RWS.EXE"
@Option 31 = "SS.EXE"
@Option 32 = "VGA1024C.EXE"
@Option 33 = "ALL OF THE ABOVE"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to copy the utilities
@EndOutDrive
@If (@Removable == 0)
@GetSubDir
@Cls
@Prompt = " Install to which subdirectory ? "
@EndSubDir
@EndIf
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib utility.lif
@If (26 [= @Option)
@File bridge.com @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (27 [= @Option)
@File rambios.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (28 [= @Option)
@File rambios.sys @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (30 [= @Option)
@File rws.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (31 [= @Option)
@File ss.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (32 [= @Option)
@File vga1024c.exe @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (67 [= @Option)
@File program.txt @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (33 [= @Option)
@File bridge.com @Out "@OutDrive:\\@SubDir\\":*.*
@File program.txt @Out "@OutDrive:\\@SubDir\\":*.*
@File rambios.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File rambios.sys @Out "@OutDrive:\\@SubDir\\":*.*
@File rws.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File ss.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File vga1024c.exe @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@EndFinish
@ElseIf ('V' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 7 = "Version 5.3 in 800 by 600 16 color"
@Option 9 = "Version 5.3 in 1024 by 768 16 color"
@Option 72 ="Version 5.4 in 640 by 400 256 color"
@Option 73 ="Version 5.4 in 640 by 480 256 color"
@Option 8 = "Version 5.4 in 800 by 600 16 color"
@Option 74 ="Version 5.4 in 800 by 600 256 color"
@Option 10 ="Version 5.4 in 1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which Versacad is installed
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Prompt = " Which subdirectory is Versacad installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 2 of 2"
@BeginLib vcad.lif
@If (7 [= @Option)
@File vcad53.bat @Out "@OutDrive":\*.*
@File enviro53.cfg @Out "@OutDrive:\\@SubDir\\":enviro.cfg
@ElseIf (8 [= @Option)
@File vcad54.bat @Out "@OutDrive":\*.*
@File enviro54.cfg @Out "@OutDrive:\\@SubDir\\":enviro.cfg
@ElseIf (9 [= @Option)
@File vcad53.bat @Out "@OutDrive":\*.*
@File pvga1024.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File enviro53.cfg @Out "@OutDrive:\\@SubDir\\":enviro.cfg
@ElseIf (10 [= @Option)
@File vcad54.bat @Out "@OutDrive":\*.*
@File pvga1024.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File enviro54.cfg @Out "@OutDrive:\\@SubDir\\":enviro.cfg
@ElseIf (72 [= @Option || 73 [= @Option || 74 [= @Option)
@File vcad54.bat @Out "@OutDrive":\*.*
@File pvgaff.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File enviro54.cfg @Out "@OutDrive:\\@SubDir\\":enviro.cfg
@EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@Cls
The Versacad driver has been extracted.
Next, you need to run ENVIRO.EXE from Versacad
to configure the driver.
Please see the utilities software manual
for complete details on running Versacad.
@Pause
@If (@Exists "enviro.exe")
@Execute "enviro",""
@Else
Unable to locate ENVIRO.EXE program.
You must run ENVIRO to complete installation !
@Pause
@Abort
@EndIf
@EndFinish
@ElseIf ('W' [= @Group)
@GetOption
@Cls
Select the display mode you wish to install
@Option 13 = " 132 column by 25 row"
@Option 14 = " 132 column by 43 row"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which WordStar is installed
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is WordStar installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib ws3_3.lif
@If (13 [= @Option)
@File 25 @Out "@OutDrive:\\@SubDir\\":row
@ElseIf (14 [= @Option)
@FIle 43 @Out "@OutDrive:\\@SubDir\\":row
@EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@If (@Exists "ws.com")
@System "copy ws.com @NewStar >NUL"
@Else
Can NOT locate WS.COM.
Be sure to make a copy of WS.COM with another name.
In the directory where WS.COM is located,
┌─────────────────────┐
type:│copy ws.com ws132.com│
└─────────────────────┘
@Pause
@EndIf
@Cls
You must run debug to create the 132 column version
of the WordStar program. (make sure debug.com is in
your path or current directory)
╔═════════════════════════════════════════════════╗
║ At the DOS prompt enter "debug ws132.com < row" ║
╚═════════════════════════════════════════════════╝
You must run the @Program utility to switch to
132 column mode PRIOR to starting your modified
copy of the WordStar program (ws132.com).
See the software manual to determine the correct
command for the appropriate mode.
Complete detailed instructions are in the software
manual.
@Pause
@EndFinish
@ElseIf ('X' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 74= " 800 by 600 2 color"
@Option 76= " 800 by 600 16 color"
@Option 75= "1024 by 768 2 color"
@Option 77= "1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which Ventura is installed
@Suppress A
@Suppress B
@EndOutDrive
@DefineDisk
@Label = "Disk 1 of 2"
@BeginLib gem3.lif
@If (74 [= @Option)
@File 800m.dat @Out "@OutDrive":\VENTURA\config.dat
@File sd_800_m.vga @Out "@OutDrive":\VENTURA\*.*
@ElseIf (75 [= @Option)
@File 1km.dat @Out "@OutDrive":\VENTURA\config.dat
@File sd_1k_m.vga @Out "@OutDrive":\VENTURA\*.*
@ElseIf (76 [= @Option)
@File 800c.dat @Out "@OutDrive":\VENTURA\config.dat
@File sd_800_c.vga @Out "@OutDrive":\VENTURA\*.*
@ElseIf (77 [= @Option)
@File 1kc.dat @Out "@OutDrive":\VENTURA\config.dat
@File sd_1k_c.vga @Out "@OutDrive":\VENTURA\*.*
@EndIf
@File install.exe @Out "@OutDrive":\VENTURA\*.*
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "\\VENTURA\\"
@System "Install"
@ChDir "\\"
@If (74 [= @Option)
Please edit the /S option in 'VP.bat' to:
┌───────────────┐
│/S=SD_800_M.VGA│
└───────────────┘
@Pause
@ElseIf (75 [= @Option)
Please edit the /S option in 'VP.bat' to:
┌──────────────┐
│/S=SD_1K_M.VGA│
└──────────────┘
@Pause
@ElseIf (76 [= @Option)
Please edit the /S option in 'VP.bat' to:
┌───────────────┐
│/S=SD_800_C.VGA│
└───────────────┘
@Pause
@ElseIf (77 [= @Option)
Please edit the /S option in 'VP.bat' to:
┌──────────────┐
│/S=SD_1K_C.VGA│
└──────────────┘
@Pause
@EndIf
@EndFinish
@EndIf
